Setup a Building View tab?

A. Adding a building view map.
To add a building view schematic or other building map image* please follow these instructions:

  1. Go to and Login. 
  2. Open the 'Manage Devices' tab and select the location you would like to add a schematic or map .jpg image to or add a location.
  3. Click 'Edit Location' and then choose the 'Building' tab above the map image at the bottom of this window.
  4. Next click 'Upload Map', find your image stored on your drive and choose 'Open' on the upload the image.
  5. You can add multiple images by clicking the 'more' tab. You may want to do this if your location has multiple floors or buildings. 
  6. Last, click 'Save and Close this Form'.

B. Adding an indiviudal monitor pin to your building view map.
The map is now uploaded to one of your locations. You will need to add your specific monitors to your building map. Note that you can individually add as many of your monitors to a building map as you would like. Please following these instructions:

  1. Log on to your account. 
  2. Open the 'Manage Devices' tab adn select the location that you have added a map to in step A above.  
  3. Select a sensor in the list to the right. 
  4. Next, click 'Edit Sensor' at the bottom of the screen and then click the map tab that you previously uploaded to your location.
  5. Now click on the map where you would like the individual monitor pin to be placed or 'located' within your map. Note you can use the 'Resize to Proportional' button to see a larger map for placing monitor pins.
  6. Now click 'Save and Close this Form'.

To add additional monitor pins on your map follow the B. steps as outlined above.